EECO U5 question

Car levels fine in the up. In the down it stops an inch low - door opens then it levels up perfectly. Would that be a DC AdJustment? Thank you

Can you feel a transition from High speed to leveling speed and have a couple inches of stabilized leveling speed?

Yes

DC should be it "IF" DC Screen is clean. If it doesn't check your down level speed, may be to fast.

Agree with Rolly, you should have 2 to 3 inches of stabilized leveling about 10 to 14 fpm, if not check the DC screen then adjust if necessary. Also I'd check the coil to make sure if car is, shows if valve or electrical.
https://www.elevatorequipment.com/eeco-valve-app
check this app out it should help

Thanks guys