working on a 330A. replaced the sensor on the cartop and am still having 0094 fault. resistor 176 is black but have seen a bunch of em. like this with no issues. however the LED next to it LED 33 is very dim. is there any way to verify if the resistor is bad, as it is soldered to the board. I also have what appears to be a blown capacitor? on the CIO board; elevator still runs, however it lasts about a day and then we get called back out.

94 is a door contact fault. Check your locks. Sometimes the car door doesn’t get closed all the way intermittently because of that little ramp the cam hits. Put some lubricant on it

awsome. I will check it out. thank you for the reply.

Shaft door closes but car door do not.