Well there is more to the story. This car originally wouldn’t come off fire service so a colleague suggested I check the 3v battery. It was dead and needed to be replaced. After replacing it came off fire service but needed a new HW scan but it kept failing. Come to find out that it appears to have the wrong job loaded in it (not the correct job number). After going through everything I’ve got it all the way back except the car & hall call io’s are missing in IO map. Maybe it’s my version of IMS but I can’t add io’s and of course the original job stick is long gone! So over this!
Add or Change I/O
1. Click the Start button...Click RUN...If not there type in REGEDIT...OK.
2. Double click HKEY_Current_User...Double click Software...Double Click Thyssen Dover...
Double click IMS...Click on Settings.
3. On the right hand screen, do you have a icon that says AddIO?
No
Right click in a blank area on the right hand screen
Select New and DWORD Value...Type in AddIO.
Hit enter...Then go to Yes instructions below.
Yes
Select AddIO
Right click it
Select Modify...change the 0
to a 1...click OK
If you have wrong version of IMS it will change back to a 0 when you reopen IMS.
You need the office version of IMS.
if IMS was activated before changing this you might have to reactivate it with a new site key
IMS 2.7 HAS THE OPTION TO CHANGE i/o[color:#CC0000][/color]