|
0 registered members (),
19
guests, and
2
spiders. |
Key:
Admin,
Global Mod,
Mod
|
|
|
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
27
|
28
|
29
|
30
|
|
|
|
|
|
Forums13
Topics6,504
Posts36,825
Members8,461
|
Most Online117 Jan 16th, 2020
|
|
|
04/26/24 09:02 PM
To reset fire service with IO injection you have to do the car and group IOs at the same time. Open both IO maps, enable IO injection in both. Pull FSH2 low (blue) in both IO maps then change injection back to red, pull FSH5 high in both car and group, wait a second then click ...
see more
|
|
04/26/24 07:22 PM
811C. I think this is the drawing number. If anybody has a print please email me. Joeluff11@gmail.com...
see more
|
|
04/26/24 01:37 PM
You need to find a mid test point to determine where the failure is. In this case I'd check the power to the lock at the terminal strip in the controller. If it's hot you know the issues on the lock side, if not it's on the other side of your test point. Best guess though if it...
see more
|
|
04/25/24 07:16 PM
Yes. It was the MLT timer There was 2 motor leads tied together where the connection was coming apart ...
see more
|
|
04/25/24 07:00 PM
my moneies is on the power supply in the COP. There starting to get that age....
see more
|
|
04/25/24 04:20 PM
Hello. Curious if anyone has had any luck obtaining parts for Garaventa as a non-dealer. We have run into some customers who have no service company and they do not use the local dealer for their elevator. This causes the issue as Garaventa will not talk to you without a tech ...
see more
|
|
04/25/24 11:40 AM
We found adjusting governor pull thru changed the slide more than anything you can adjust on the safety. I would suggest a dry powder like line chalk brushed on over a light coat of hair spray to see your slide....
see more
|
|
04/25/24 12:04 AM
disconnect LOP and VF connector and reset...
see more
|
|
|
|
|
|