|
0 registered members (),
16
guests, and
0
spiders. |
Key:
Admin,
Global Mod,
Mod
|
|
|
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
27
|
28
|
29
|
30
|
|
|
|
|
|
Forums13
Topics6,505
Posts36,829
Members8,461
|
Most Online117 Jan 16th, 2020
|
|
|
04/23/24 11:37 AM
Nice job! In the beginning, we were told to tighten one belt to create slack for the others like you did. I started hanging the car just a bit after doing several the original way because I noticed that we were starting to ruin the threads on the shackles by overtightening them a...
see more
|
|
04/23/24 08:38 AM
Thanks for all the help. We ended up doing one at a time and using the fishing string with a wrap of electrical tape to keep line from getting snagged. The mcp showed to tension by getting the springs within 1mm of each other. Reset the belt info in controller and was up and...
see more
|
|
04/23/24 04:05 AM
I have a 3 stop schindler 3300. Unit was found on the 1st floor not responding. After a soft reboot the controller just sits there with a spinning bar. Never boots up, waited 2 hours. If I switch the JHS switch to “off” it will boot up into the main menu. If I switch it to ...
see more
|
|
04/23/24 02:53 AM
It was a broken inspection switch. The plastic catch that holds the contact was cracked and looked like it made contact, but wasn't. I really appreciate the help FLyballgov & Indritwetrust. Anyone know where I can get a fault log for the Tac20 & Tac 32?...
see more
|
|
04/23/24 02:10 AM
Ok, found a ground on the safety circuit input on the drive control board and got it repaired. We’re now getting a 0432 and 0433 fault. We’re assuming the brake isn’t lifting, is all of this fed from the same drive control board or is there something else in the drive tha...
see more
|
|
04/22/24 11:18 PM
As far as the belt programming, yes that is done thru the on screen menu. The non-proprietary thing is a load of crap. It's 100% proprietary equipment. Unless you work for Schindler, you won't have access to manuals or tools for the most part. We all know the other companies rev...
see more
|
|
04/22/24 10:09 PM
I have a customer that is having a few 3300s installed. They were sold as non proprietary. I am suppose to put together a list of documents and service tools necessary to service these things for the GC on the job to pass along to Schindler. Does anyone have any suggestions...
see more
|
|
04/22/24 10:05 PM
Can you program the new belt data from the on board cpu ?...
see more
|
|
04/22/24 03:25 PM
Hi Guys . Does anyone have a set of diagrams for a pickerings Econolift please...
see more
|
|
04/22/24 09:10 AM
Use rail blocks at the top of the rails with appropriate chain falls attached. Remove oilers from each car top bracket (these brackets are designed for hanging car, just do 1 belt at a time and it wont be an issue) and install long reach clevis to each side. Land counterweight at...
see more
|
|
04/20/24 07:19 PM
Safeties are inside the trolley that rides in the track. If there is nothing left in the overhead to pick the car up, you will probably need to crib up to the platform and support the car and sling an disconnect the trolley from the cab, four allen bolts secure the trolley to t...
see more
|
|
04/20/24 07:12 PM
Great idea! Love my tomahawk....
see more
|
|
04/20/24 06:26 PM
They're not "illegal" they're just against some companies safety policies...
see more
|
|
04/20/24 05:53 PM
aren’t those illegal? I thought those temporary bridging devices couldn’t be use at all to short out hall door contacts...
see more
|
|
|
|
|
|