hello all
i have a kone monospace working on and a keep getting missing 61u,i change the 61u and still getting the same problem,i change the board on top of the lift and still getting the same problem,any input
Posted By: Dmhughes
Re: kone monospace - 05/09/13 06:58 PM
Hi,
Is it missing all the time or every now and then? If so have you got too much play in top shoes, and did you do a shaft setup?
it misses it all the time and we hve adjusted the switch as close as possible to the magnet
Posted By: john jay
Re: kone monospace - 05/09/13 08:11 PM
the magnet could be upside down.
the 61u/61n magnets can turn in any direction unlike the 77u/77n so its something else
Posted By: Dmhughes
Re: kone monospace - 05/09/13 09:37 PM
Is this after a shat setup, and have you done a lon download after changing boards? & Are you getting any other fault codes, also what's the distance between the 61u & 61n it should be 128/130mm centres, believe it or not I've had one that was causing havoc with 61 switches & it was down to a faulty tacho (strange)
Posted By: bk2fla
Re: kone monospace - 05/10/13 05:48 PM
sounds like you need to do adon learn and lon download