Posted By: Smitty
Dover MSC1 regulator - 01/22/16 04:08 PM
Looking for any info on these.
Posted By: jkh
Re: Dover MSC1 regulator - 01/23/16 01:04 AM
I may have some on an one of my jobs. What is going on?
Posted By: Vatorgator
Re: Dover MSC1 regulator - 01/23/16 03:56 AM
pm me your email, i have a few manuals, have adjusted a few with the manuals i have,
also have some drive boards if your interested.
its been a few years since i have worked on these, but i remember in the adjustment procedure it recommended a oscilloscope to adjust the frequency just right, i just used my meter on HZ and was able to adjust the few drive boards i replaced this way. just fyi worked great
Posted By: Smitty
Re: Dover MSC1 regulator - 01/25/16 02:39 PM
Guy asking me for help on one.
He is telling me conflicting info.
From what he describes, it sounds like the current feedback is either missing or wrong causing the unit to saturate instantly. But I have not worked on this regulator yet. But you know..a drive is drive
Posted By: Smitty
Re: Dover MSC1 regulator - 01/25/16 02:40 PM
Btw my email is viking4tress@yahoo.com
Thanks for your help
Don
Posted By: Smitty
Re: Dover MSC1 regulator - 03/13/16 12:09 AM
Got it going. I had the regulator rebuilt. The unit had a few bad transistors The generator shunt field was also grounded hence the original problem.
Posted By: MILTRONICS
Re: Dover MSC1 regulator - 04/07/16 11:37 PM
Does anyone still have those manuals? I'm trying to help a mechanic on the job performance the adjustment. Can someone email them to me at issa@elevatorboards.com, Please and thank you.