Posted By: Jluff
Schindler 330a code 106 phase loss contact - 08/18/16 10:03 AM
Hi guys. We had storms and lost power on a Schindler 2 stop hydro. It lowered to 1st floor with door open and has a 106 block code. It's says it has a phase monitor open. On the print it's says its rkph contact is open. I cannot find this contact any where. I have all the proper power supply to my x12 including the safety circuit but no skd1 light. Can any one help with this ??
Posted By: lowoil
Re: Schindler 330a code 106 phase loss contact - 08/18/16 11:23 AM
Is the reverse phase lit up
Posted By: Jluff
Re: Schindler 330a code 106 phase loss contact - 08/18/16 12:24 PM
I don't see a reverse phase device. The drive monitors that and the drive is ready to go
Posted By: Jluff
Re: Schindler 330a code 106 phase loss contact - 08/20/16 11:00 AM
The APE unit was not on. It turns out to b a bad mother board. Thanks for your help guys. I'm new to your forum I'm excited to be able to help out and participate.
Posted By: chicago
Re: Schindler 330a code 106 phase loss contact - 08/31/16 11:50 PM
Blown 5 amp glass fuse on bottom of board.