Posted By: BRG
Haughton TH Opertor - 09/01/17 09:03 AM
Looking for some information on this operator. Had an issue with some wires on the backplane melting across the resistors and causing all sorts of problems. Took out the door open contactor, the CL resistor and the door motor. The print I have is from the 70's so I will say no more about it except it is almost illegible.
I got everything going except in the open I have no slowdown. They slam open. Close is great. Any help would be appreciated. I'll be checking here as I read through and try not to spill more coffee on the "prints". I am trying to contact Schindler in Holland to see if the could be of any assistance in obtaining a legible print.
I got everything going except in the open I have no slowdown. They slam open. Close is great. Any help would be appreciated. I'll be checking here as I read through and try not to spill more coffee on the "prints". I am trying to contact Schindler in Holland to see if the could be of any assistance in obtaining a legible print.