Posted By: ubro96
400A red light on drive - 11/19/17 12:13 PM
Hey, Guys, I have a Schindler 400A with a red light on the drive and no power going anywhere else in the control the screen is blank and I am to assume that there is something wrong with the drive. I'm not that familiar with the Schindler products any ideas?
Posted By: cneilson
Re: 400A red light on drive - 01/16/18 12:24 AM
A red light on a Schindler drive is not good. There is a reset button next to the lights on the drive, use a pencil and try pushing the reset button to rest the drive.
Posted By: Indirtwetrust
Re: 400A red light on drive - 01/18/18 12:40 AM
The red light on the drive might be a symptom of having no power to the rest of the controller. I would be looking at fuses and power supply to CPU.
Check the internal motor start contactor. If it is bad, pull wires out of contactor, Mount, and wire larger one outside of drive. This is a common problem make easier to get to, for next time.
Posted By: JustWolf
Re: 400A red light on drive - 01/22/18 03:05 PM
24 volt power supply in the drive?