Posted By: lowoil
Ecco bp2 valve - 01/16/18 05:44 PM
I have an old ecco bp2 pump and motor runs but cant get car to move,tried the adjustment procedure with no luck anyone familar with these?
Posted By: Rolly
Re: Ecco bp2 valve - 01/16/18 10:11 PM
This unit probably has a BP-3 sizing & bypass valve. Is the bypass ok? Is the BP-2 coil getting energized or is the coil open?
Posted By: lowoil
Re: Ecco bp2 valve - 01/16/18 11:55 PM
coils on the down side,the up has no coil just bypass valve and relief.appears to be bypassing cant get pressure on system.no prints on job but 2 wires going to coils coming off dn1 and dn2 my valve book says up runs off pump no electrical control.
Posted By: chicago
Re: Ecco bp2 valve - 01/17/18 01:43 AM
Had similar problem, removed oil from tank and found part of stopper jammed/ stuck in the oil intake.
Posted By: Rolly
Re: Ecco bp2 valve - 01/17/18 02:07 PM
Pm me an email will send you a write up on the BP-3, See if it is what you have.