Otis MCS 220 fault

Anyone have fault codes for MCS 220M OVF20
I'll get a hand tool on there later today to see the fault logs

Lift takes off and immediately stops soon after, and attempts take off again for about 3 times until stops completely.

I've replaced the encoder, still same issue

Picture of event log on LCB
https://imgur.com/a/xbk10

Fault shown on drive (ovf20)
https://imgur.com/a/prkkl

I would start by doing a shaft learn run

PM

>Curr IGBT,

Normaly you have to chnge OVF

...........I concur Drive Time...