Posted By: JimboNJ
TAC 50 traction #90 Fault - 02/12/18 05:14 PM
Could anybody give me some info for this Fault ? Doors also failing to open. Thank you
Posted By: Rolly
Re: TAC 50 traction #90 Fault - 02/12/18 06:07 PM
Does this job have freight doors?
Posted By: JimboNJ
Re: TAC 50 traction #90 Fault - 02/12/18 06:34 PM
Yes. Peele. Sorry forgot to say that. Was before coffee- car has front and rear doors. Rear is working fine but front doors open automatically which they never did before - can close the door and she runs - take car to a floor , get out and press door close - they close up. Take finger off the close button then about 5 seconds later they will re-open
Posted By: Rolly
Re: TAC 50 traction #90 Fault - 02/13/18 03:32 AM
90 is Freight doors were commanded to open but did not open.
Posted By: lowoil
Re: TAC 50 traction #90 Fault - 02/13/18 12:54 PM
I would go through the zone switch contacts first and clean em up,then check dol and dcl,and door closed contact
Make sure lock is dropping out also.
Posted By: JimboNJ
Re: TAC 50 traction #90 Fault - 02/13/18 03:32 PM
I'll get to work on that. - thanks guys