Posted By: uneedamod
Re: Need info on millar cvt unit put in around 1988 - 06/26/19 08:00 PM
Have you tried calling Bob Brumbach
Posted By: Joe sj
Re: Need info on millar cvt unit put in around 1988 - 06/26/19 08:20 PM
Looking for prints or manuals for millar cvt with a GE drive
Posted By: Joe sj
Re: Need info on millar cvt unit put in around 1988 - 06/27/19 03:34 PM
It’s for a millar cvt 8600 any info
Posted By: RustyIron
Re: Need info on millar cvt unit put in around 1988 - 06/30/19 03:35 AM
Hmmm... my CVT's didn't have a GE drive, and not sure if they were 8600. I might have manuals stashed away, but I've got a ton of good boards. Won't be able to check my stash until next week.
Posted By: Rolly
Re: Need info on millar cvt unit put in around 1988 - 06/30/19 09:46 PM
I have the manual for Millar and the DC300 drive. Also have a hand held tool for the drive. Power supplies go out on the drive with ripple. Causes lots of problems. Access Electronics fixed them. Nobody sent me a PM as I said earlier.
Posted By: Smitty
Re: Need info on millar cvt unit put in around 1988 - 07/12/19 12:39 AM
Which DC drive. Millar CVT 8600 used a GE Valuetrol analog drive. I adjusted a few of these back in the day.
I probably can help you out
Posted By: Joe sj
Re: Need info on millar cvt unit put in around 1988 - 07/15/19 06:03 PM
It’s a Ge drive I have a manual for nobody seems to know the password to get into the cvt 8600 I set the baud rate to 1200 it tells m cvt 8600 ctl tried all the passwords form manuals that I was sent cannot get any farther let me know if idea thanks
Posted By: Rediron1861
Re: Need info on millar cvt unit put in around 1988 - 03/31/21 01:51 AM
Looking for trouble shooting guild ge dc 300 on t111 Dover gearless