Home

schindler 3300 fire service reboot or software rel

Posted By: playblues7

schindler 3300 fire service reboot or software rel - 08/08/19 08:16 PM

An inspector was on site and after attempting to test firemans service the elevator lost programming, probably due to him killing power without proper shutdown. We let the emergency battery charge overnight and used the reset procedure and we reloaded the software from a USB that we had made as a backup. But the firemans service is still non functional, anyone with the software needed to reload firemans?

jim 630-791-9553 jim@totalelevator.co
Posted By: solidstate

Re: schindler 3300 fire service reboot or software rel - 08/09/19 04:49 PM

Wouldn't the backup have had have the fire mans service on it?
Posted By: sampler

Re: schindler 3300 fire service reboot or software rel - 08/17/19 11:15 AM

if you have done right assigment of JNFF and not work you'll need chip card that is configrated by Schindler. It will include fire service BR_ option. Also there are some diffrent ways.
Also how could you download SW via usb. 3300 only allows MMC card.
Posted By: Cjones

Re: schindler 3300 fire service reboot or software rel - 02/11/20 01:42 PM

What is JNFF mean. I’m a TKE employee
Posted By: Alex75

Re: schindler 3300 fire service reboot or software rel - 02/11/20 03:33 PM

JNFF = Switch Firefighter Service (NC) (For the fireman to start Fire Service mode)

Is it FW Switch in TKE for Fire Service....?
© 2024 Elevator Forum