Posted By: Kone66
Mac 104 board upgrade - 10/25/19 03:47 AM
Hey there we just did a 104 board up grade with an aux board / were u have to cut the top jumper trace on the board/ and what is happening is the door seems to stall part way in the open but works fine in the close / any thoughts on this , this controller has a De1 & De2 Relays mfs controller
A couple of things. The door does open fully half of the time. The other half it stalls. When it stalls the OF led is on (lit green) on the 104 board. Doors will not respond to anything at that time
A couple of things. The door does open fully half of the time. The other half it stalls. When it stalls the OF led is on (lit green) on the 104 board. Doors will not respond to anything at that time