Posted By: wltr00
TAC50-04 Accord Drive - 02/07/20 07:49 PM
I'm getting a 663 fault and the car is on the Top Directional Limit. I am unable to run the car down on INSP. I have 108 to 115 jumped out to try to run of the top limit with no luck. I have adjusted the brake and it is appears to be working properly. My encoder appears to be working correctly.
Appreciate any help. Can't check any drive settings. If the Accord drive is bad does anyone know where to get it repaired?
Posted By: wltr00
Re: TAC50-04 Accord Drive - 02/07/20 08:26 PM
Also getting a 1551 fault -- Governor Slack Rope Switch Activated
Posted By: wltr00
Re: TAC50-04 Accord Drive - 02/07/20 08:26 PM
Also getting a 1551 fault -- Governor Slack Rope Switch Activated
Posted By: john jay
Re: TAC50-04 Accord Drive - 02/07/20 11:03 PM
Are you by chance on the safties? Can u bump up?
Posted By: Indirtwetrust
Re: TAC50-04 Accord Drive - 02/08/20 12:07 AM
Probably need to get that slack rope switch jumped or reset. It actually wires into the bottom HN card so you can’t jump it from the machine room. You’ll need an RRF to clear it after it’s reset.
Posted By: Silly
Re: TAC50-04 Accord Drive - 02/08/20 08:14 PM
A lot of early installs took the slack rope switch into the lower safety string, so it was in with the pit stop switch. Also had another version where slack rope switch was brought directly back to controller and I/O was put into spare port...