Schindler smart 1 mrl

Hi,

Schindler smart 1 mrl/ 2 belts/ 6 level
(See pics controller)
(I Think it’s a smart 1.......???)


Problem:

For several months it has been making bad landings.
100 mm above level
Most of the bad landings are in the top,it hits the upper
End stop contact...... today it landed 100 mm above
Level 5 (not level 6)

One of these days we are gonna check all sensors in
The shaft.... today i just made a turn off/on... and it runs again.


My question:

Are there anyway i Can Watch the latest faults on this controller...

Any Good ideas out there ... please ?????


/ shoemaker

Menu 50, change the 0 to 1, press enter?
Then you see latest faults of the controller.

And this is Schindler 3300 elevator.

Could be the PHS optical reader, motor encoder.

Thanks a lot 👍👍👍

HI SVe,

If i wanna try a new Learn Run.

Menu 10 and then what ???

(Any special things i have to do when i make a new learn
Run..... )

/ shoemaker