Posted By: my luft
kone monospace 1301 fault - 09/08/20 02:25 PM
Hello there
Can anyone guide me to the following: if the COB is replaced as a possible 1301 fault, are there any more actions to be done, so the board can
be found by the network ? or is it plug n play
Posted By: Azhar hussain
Re: kone monospace 1301 fault - 09/08/20 06:09 PM
you replaced the cable first. which is connected to COP to the Maintenance box.
Posted By: OH boy
Re: kone monospace 1301 fault - 09/08/20 07:55 PM
Could be mul board, dob, cable
I have had bad button or switch cause 1301 fault.
If you replace mul board you have to do a 5:7:1
Posted By: my luft
Re: kone monospace 1301 fault - 09/09/20 08:35 AM
Thank you. Will follow your tips. I am no familiar will terminology so 5:7:1, you mean goto menu 5 sub. 7 and set to 1 ( LON download) ?
Posted By: my luft
Re: kone monospace 1301 fault - 09/09/20 08:37 AM
refering to the button probabillity, i remeoved all buttons to cancel this out.