Kone kcm 831

Can anyone tell me where I can get a full set faults and descriptions. The book I have is incomplete goes to 99 then skips to 140 and stops at 213. I keep getting at 109 and247 fault thanks

02 47=
Supervision for telephone line
communication.monitors the
dedicated
telephone line medium which is
provided for Emergency
communications
The dedicated
telephone line medium which is
provided for Emergency
communications is not OK

Visual Alarm:
HASG11: Output XFA6
Audible Alarm:
HASG11: Output XFA5

To fix=
Disconnect telephone
line connected in KRM board.

0109= Drive position lost.

Drive has lost position Drive count differs more
than 300 mm at 30 or B30
vane edge
Synchronisation drive
request
Check the position
of 77:U/N and
61:U/N magnets.
Move lift when power is
off
01 09 38 08 DL Position lost LCEDRV bar pulse position is
incorrect
Bar pulse count differs
more than 100 mm at 30 or
B30 vane edge
Synchronisation drive
request
Pulse position is
recocered at 77
switch edge
Move lift when power off.

Thanks so much!!! Any idea where I can get a copy of all the faults?

The faults in the range of 109s are drive specific faults you would need to identify the drive you're working on they won't always be the same faults and the subcodes would be different.