Posted By: JohnsPerry
Schindler 5500 error 709 - 09/08/21 07:07 AM
Hi all, I have 4 Schindler 5500 units, 12 floors on my route, the only breakdowns I get come up with 1680, preceded by 709 error, easy reset but I want a more permanent solution, can be any floor, any time? Thought it might of been someone bouncing the belts but I have seen it on cctv from inside and nobody was in the car at the time and it’s never a stuck with passengers,Any suggestions?
Posted By: heisenberg
Re: Schindler 5500 error 709 - 09/08/21 01:24 PM
709=
The safety circuit opened during a trip or a test. The safety circuit may have been interrupted only for a very short time. Check safety circuit and logs of other subsystems (total error log)
2 Cable of safety circuit signal broken or not connected Check wiring from control (ASxxx board) to frequency converter.
Posted By: heisenberg
Re: Schindler 5500 error 709 - 09/08/21 01:30 PM
Check safety switches, maybe govenor tension switch is close?
Posted By: shoemaker
Re: Schindler 5500 error 709 - 09/26/21 04:56 PM
Hi Heisenberg,
Is it possible to get this fault list With error descriptions???...
I also have a 5500 on my route.......