Posted By: scottsr
Schindler 330a fault screen - 03/07/12 08:23 PM
Does anyone have a write up on the fault interpetations on this unit? How does one change the parameters? Presently this one is constantly going on coldoil .Scottsr scottsr@accelevator.com
Posted By: kenelev
Re: Schindler 330a fault screen - 03/07/12 09:50 PM
Posted By: scottsr
Re: Schindler 330a fault screen - 03/12/12 08:09 PM
Thanks Kenelev. I did not see fault log for the on board digital display. DO I NEED THE FAST TOOL at this point?
Posted By: johnsith
Re: Schindler 330a fault screen - 03/13/12 03:22 AM
yes,I saw something about elevator from saneielevator.com,and you could ask it for help.it save my time to choose home elevator.
Posted By: kenelev
Re: Schindler 330a fault screen - 03/13/12 10:32 PM
Yes, you need the tools to get in to change parameter and perform learn trip.
Posted By: Elevatorfella
Re: Schindler 330a fault screen - 03/14/12 12:37 AM
I had a similar situation, I unplugged the thermistor connector from the CRIPHNA board and it stopped, got a new thermistor and plugged it back in. No further issues
Posted By: Elevatorfella
Re: Schindler 330a fault screen - 03/14/12 12:41 AM
If you go to error codes, then hit enter, then enter again you will get xtrainfo, give me the fault code and xtrainfo and i can tell you what's going on.
Posted By: Vatorman15
Re: Schindler 330a fault screen - 03/14/12 12:45 AM
Elevatorfella is kinda right its the thermistat. Disconnect the middle wire and order a new one.