Schindler not moving after Deep Switch 8

Posted By: wiz

Schindler not moving after Deep Switch 8 - 07/30/22 08:45 PM

Greetings

We did a learning measurement trip on a schindler smart mrl 002 elevator using Dip Switch 8 on the main controller board. The lift learnt the floors, after the learnt trip it goes to the last floor
and shows the WDOG, Drive, KS, and Error LED blinking and remains on the last floor.
Anyone experience this problem, what causes it? Can it be corrected?

Regards

Posted By: wiz

Re: Schindler not moving after Deep Switch 8 - 07/31/22 06:54 PM

Originally Posted by wiz

Greetings

We did a learning measurement trip on a schindler smart mrl 002 elevator using Dip Switch 8 on the main controller board. The lift learnt the floors, after the learnt trip it goes to the last floor
and shows the WDOG, Drive, KS, and Error LED blinking and remains on the last floor.
Anyone experience this problem, what causes it? Can it be corrected? No safety circuit open, but something is
blocking the lift from moving, any ideas?

Regards

Posted By: sampler

Re: Schindler not moving after Deep Switch 8 - 07/31/22 07:49 PM

sim

Posted By: wiz

Re: Schindler not moving after Deep Switch 8 - 07/31/22 10:53 PM

Are you saying the SIM card might be faulty or not in place properly but lift did a shaft measurement?

Posted By: sampler

Re: Schindler not moving after Deep Switch 8 - 08/01/22 02:50 PM

yes. it goes for learning trip although without sim and after trip if it can not read sim it behaves as you menioned.

Posted By: wiz

Re: Schindler not moving after Deep Switch 8 - 08/04/22 06:57 PM

Originally Posted by sampler

yes. it goes for learning trip although without sim and after trip if it can not read sim it behaves as you menioned.

Greetings

I tried re-inserting the sim. Is there a way to solve this problem besides replacing the SCIC?

Regards

Posted By: sampler

Re: Schindler not moving after Deep Switch 8 - 08/05/22 08:13 AM

maybe replacing SCIC may not be a solution. generally sim is broken. so if you have a bionic controller (bx, 3300 etc..) and also cadi you can check Sim. if not possible the company support should be requested.
I