Posted By: Montana
TAC32 MRL Test Procedures Tank in Pit - 07/12/23 09:14 PM
Can someone share the CAT1 test procedures for this man killer? ella.vadors@yahoo.com
Thanks
Posted By: Alto101
Re: TAC32 MRL Test Procedures Tank in Pit - 07/13/23 02:34 AM
I came across one of these. It was flooded with water during the storm surge. What a horrible concept , there was no access door to that tank. Controller in the jamb.
only way I could imagine to not be under the car would be to extend the pressure gauge hose and stand at the entrance with the door lock jumped. Such a bad investment to own that thyssen mrl.
Posted By: Montana
Re: TAC32 MRL Test Procedures Tank in Pit - 07/13/23 02:51 AM
I totally agree with you Alto101. They aren't my favorite to work on. They are very temperamental.
Posted By: UnkindBuffalo
Re: TAC32 MRL Test Procedures Tank in Pit - 07/13/23 09:32 AM
The pressure test is done off the UIT on the controller, you never have to be under the car in the tank, it’s a digital reader, no gauges needed
Posted By: Montana
Re: TAC32 MRL Test Procedures Tank in Pit - 07/14/23 01:00 AM
Thank you UnkindBuffalo. Do you have the procedures to push it to the stop ring to test relief pressure?