Posted By: John. H
Otis 311 gem - 02/10/24 03:01 AM
I can’t seem to find the setting LSP-NY. The rope gripper doesn’t set during unintended motion test and book says to check that this is set to one. Any help greatly appreciated. Thanks John
Posted By: MX4
Re: Otis 311 gem - 02/10/24 05:26 AM
M-2-3-7 go on until you see enable lsp type
0 = disabled
1 = disk brake
2 = rope gripper
3 = gov trip solenoid
Posted By: MX4
Re: Otis 311 gem - 02/10/24 06:11 AM
Looking through some notes now I question my above answer, I DONT have anything for 311 gem but to find that same parameter on other controllers they appear to be the same (311MECS, gen2 etc)
Posted By: EElevator
Re: Otis 311 gem - 02/10/24 01:06 PM
They give the gov trip solenoid as an option to activate the governor to provide unintended motion protection? Lord help the folks on those cars. Of all the Otis' I have only roughly 1/2 do the governor solenoids have the oomph to reset the switch (apollo govs). I wouldn't want to trust it to set it in that scenario.
Posted By: John. H
Re: Otis 311 gem - 02/10/24 02:24 PM
Thanks you guys!! Really appreciated!!