HELP!!!!!! Serge issues

You are not logged in. [Log In] Home Forums Print Talk HELP!!!!!! Serge issues

1 registered members (wltr00), 18 guests, and 3 spiders.

Key: Admin, Global Mod, Mod

Newest Members

Forum Statistics

Forums13

Topics6,515

Posts36,882

Members8,461

Most Online117
Jan 16th, 2020

Print Thread

#7569 - 07/02/13 07:58 PM HELP!!!!!! Serge issues
Joined: Feb 2013 Posts: 65 Oleeightball journeyman
Oleeightball journeyman Joined: Feb 2013 Posts: 65 Southeast	PLO need prints for a 1984 vintage serge controller, and also a relay and switch legend. I have a dwg no. 6.02.01 on one page of legend. Thanks a million. Peace

#7572 - 07/02/13 11:53 PM Re: HELP!!!!!! Serge issues [Re: Oleeightball]
Joined: Jan 2012 Posts: 419 Broke_Sheave addict
Broke_Sheave addict Joined: Jan 2012 Posts: 419	Serge was bought out by Fujitech. Last I checked you could purchase the prints from Fujitech America. http://www.fujitecamerica.com/ And if I remember correctly this was in the time when Serge owned a diode factory...LOL.. AND a 12VDC ice cube can be plugged into a socket next to a 120VAC relay. Read the labels on the relays before you swap... Good luck.. It Don't mean a thing if it aint got that swing. Cool, Free, Johnny Smith courtesy of NPR..HERE http://www.npr.org/ramfiles/asc/asc25.smith.asx

#7573 - 07/03/13 12:48 AM Re: HELP!!!!!! Serge issues [Re: Broke_Sheave]
Joined: Feb 2013 Posts: 65 Oleeightball journeyman
Oleeightball journeyman Joined: Feb 2013 Posts: 65 Southeast	You remember correctly, diodes a plenty on controller. Thanks ill check Fujitec....

#7585 - 07/04/13 03:20 AM Re: HELP!!!!!! Serge issues [Re: Oleeightball]
Joined: Oct 2009 Posts: 404 Scott Davidson troubleshooter1
Scott Davidson troubleshooter1 Joined: Oct 2009 Posts: 404 california	what version, relay logic, newer plc, or the older series one plc. i have a few prints of each. pm me also what kind of drives do they have.

Photo Gallery