KCM Hydro 831

You are not logged in. [Log In] Home Forums Technical Questions KCM Hydro 831

0 registered members (), 28 guests, and 4 spiders.

Key: Admin, Global Mod, Mod

Newest Members

Forum Statistics

Forums13

Topics6,515

Posts36,882

Members8,461

Most Online117
Jan 16th, 2020

Print Thread

#9935 - 02/25/14 10:49 PM KCM Hydro 831
Joined: Aug 2013 Posts: 116 Elev^te79 member
Elev^te79 member Joined: Aug 2013 Posts: 116	Having an intermittent problem with the elevator running in the up direction on full speed. Coils on the valve checked out good, (4 coils) . K1 relay ringed out good, even get the high speed light on the DRV board but it still runs up like it was on access. I refered to print 800767E04. Any one had this ? Only in the up direction, 2 stops and happens intermittent .

#9936 - 02/26/14 05:23 AM Re: KCM Hydro 831 [Re: Elev^te79]
Joined: Jan 2014 Posts: 32 Kone D newbie
Kone D newbie Joined: Jan 2014 Posts: 32	Valve type? Dirt screen maybe? Check switch or magnet. Hoistway learn. Bad board maybe.

#9938 - 02/26/14 06:01 AM Re: KCM Hydro 831 [Re: Kone D]
Joined: Aug 2013 Posts: 116 Elev^te79 member
Elev^te79 member Joined: Aug 2013 Posts: 116	Maxton UC4 valve. Haven't done an acel/dcel learn yet nor have I done a hoistway learn. That's next, after that my only guess is a bad DRV board.

#9941 - 02/26/14 04:45 PM Re: KCM Hydro 831 [Re: Elev^te79]
Joined: Aug 2013 Posts: 116 Elev^te79 member
Elev^te79 member Joined: Aug 2013 Posts: 116	Nevermind , bad 136 switch in the hoistway.

#9946 - 02/27/14 01:43 AM Re: KCM Hydro 831 [Re: Elev^te79]
Joined: Jan 2014 Posts: 32 Kone D newbie
Kone D newbie Joined: Jan 2014 Posts: 32	Cool

Photo Gallery