Kone KCM831

You are not logged in. [Log In] Home Forums Technical Questions Kone KCM831

0 registered members (), 14 guests, and 3 spiders.

Key: Admin, Global Mod, Mod

Newest Members

Forum Statistics

Forums13

Topics6,515

Posts36,879

Members8,461

Most Online117
Jan 16th, 2020

Print Thread

#10971 - 06/10/14 02:03 PM Kone KCM831
Joined: Feb 2010 Posts: 60 bk2fla Service Manager
bk2fla Service Manager Joined: Feb 2010 Posts: 60 south florida	Hey all, My shaft communication light on my lcecpu is off. when I place the car on machine room inspection the light wont come on. I can't run the car on inspection or normal operation. any ideas? I think the lcecpu is bad. I replaced Adon board and I can't do a learn because I can't run the car. when I try to place a car call from the controller the display says NO ACC. thanks in advance!!!! All those who wonder are not lost

#10973 - 06/10/14 05:24 PM Re: Kone KCM831 [Re: bk2fla]
Joined: Oct 2013 Posts: 113 chicago member
chicago member Joined: Oct 2013 Posts: 113	Need a fault code.... F1-?

#10985 - 06/11/14 04:32 PM Re: Kone KCM831 [Re: chicago]
Joined: Nov 2013 Posts: 93 koneisland journeyman
koneisland journeyman Joined: Nov 2013 Posts: 93	Check floor boards are okay (i.e. Nodes)

#10988 - 06/11/14 05:00 PM Re: Kone KCM831 [Re: bk2fla]
Joined: Nov 2013 Posts: 93 koneisland journeyman
koneisland journeyman Joined: Nov 2013 Posts: 93	No Acc usually comes up when access systems are installed i.e. card readers etc

#11116 - 06/25/14 05:34 AM Re: Kone KCM831 [Re: koneisland]
Joined: Aug 2013 Posts: 116 Elev^te79 member
Elev^te79 member Joined: Aug 2013 Posts: 116	You can pull the connector off of the gateway board to disable card access

Photo Gallery