KCM831 with V3F25 Drive

You are not logged in. [Log In] Home Forums Technical Questions KCM831 with V3F25 Drive

0 registered members (), 14 guests, and 4 spiders.

Key: Admin, Global Mod, Mod

Newest Members

Forum Statistics

Forums13

Topics6,525

Posts36,929

Members8,461

Most Online117
Jan 16th, 2020

Print Thread

#13366 - 02/03/15 01:51 PM KCM831 with V3F25 Drive
Joined: Feb 2014 Posts: 32 travator Vtravis
travator Vtravis Joined: Feb 2014 Posts: 32	I have a KCM831 with V3F25 drive that will not run at all. Throwing two faults: 26-drive not ok and 83-position lost. Showing position 0 and I have a speed > 0.1 m/s light on the CPU board that stays on. Drive gone? Any help would be appreciated.

#13367 - 02/03/15 02:12 PM Re: KCM831 with V3F25 Drive [Re: travator]
Joined: Nov 2009 Posts: 50 koss journeyman
koss journeyman Joined: Nov 2009 Posts: 50 UK AND LOOKING FOR A JOB!	Drive gone,,,methinks,,,new one required!

#13369 - 02/03/15 04:32 PM Re: KCM831 with V3F25 Drive [Re: koss]
Joined: Feb 2014 Posts: 32 travator Vtravis
travator Vtravis Joined: Feb 2014 Posts: 32	I think so too. When I go to the drive parameters I get an E001. No parameters.

#13402 - 02/07/15 04:47 PM Re: KCM831 with V3F25 Drive [Re: travator]
Joined: Aug 2013 Posts: 116 Elev^te79 member
Elev^te79 member Joined: Aug 2013 Posts: 116	I've had that as well , maybe I got lucky but I kept powering down until the parameters came back. Took about 10 power cycles tho. Worth a shot if you haven't done so already.

Photo Gallery

Page Time: 0.030s Queries: 15 (0.006s) Memory: 2.6739 MB (Peak: 2.8241 MB) Zlib disabled. Server Time: 2024-05-13 08:18:42 UTC