Otis E335m

You are not logged in. [Log In] Home Forums Technical Questions Otis E335m

0 registered members (), 16 guests, and 4 spiders.

Key: Admin, Global Mod, Mod

Newest Members

Forum Statistics

Forums13

Topics6,521

Posts36,915

Members8,461

Most Online117
Jan 16th, 2020

Print Thread

#14920 - 08/28/15 01:15 AM Otis E335m
Joined: Apr 2013 Posts: 41 500fpm Elevator fixit guy
500fpm Elevator fixit guy Joined: Apr 2013 Posts: 41	I have an Otis E335m controller with a dsd 412 drive that is having leveling issues. It always overshoots the floors about an inch in both directions then levels back to the floor perfectly. Selector checks out ok LU DZ LD all show up in the proper sequence. Any suggestions?

#14922 - 08/28/15 04:04 AM Re: Otis E335m [Re: 500fpm]
Joined: Mar 2015 Posts: 69 Magic smoke Shaking the Bush!!
Magic smoke Shaking the Bush!! Joined: Mar 2015 Posts: 69 On a Boat!	Is it using a tape reader? If so, the guides may be worn to much, giving it to much play. When every circuit board is made. They put a little magic smoke inside.

#14927 - 08/28/15 11:52 AM Re: Otis E335m [Re: 500fpm]
Joined: Apr 2013 Posts: 41 500fpm Elevator fixit guy
500fpm Elevator fixit guy Joined: Apr 2013 Posts: 41	It does have a tape selector and all the guides have been replaced

#14932 - 08/28/15 06:08 PM Re: Otis E335m [Re: 500fpm]
Joined: Jan 2012 Posts: 885 jkh 4 Ever Learning.
jkh 4 Ever Learning. Joined: Jan 2012 Posts: 885	If you place the car on test & inspection. Move it up or down a few inches, leave it in test mode, turn off inspection, does it level in properly? Make good choices, JKH

#14936 - 08/28/15 08:30 PM Re: Otis E335m [Re: jkh]
Joined: Mar 2015 Posts: 69 Magic smoke Shaking the Bush!!
Magic smoke Shaking the Bush!! Joined: Mar 2015 Posts: 69 On a Boat!	is the loadweighing calibrated correctly? When every circuit board is made. They put a little magic smoke inside.

#14949 - 08/30/15 05:00 PM Re: Otis E335m [Re: 500fpm]
Joined: Apr 2013 Posts: 41 500fpm Elevator fixit guy
500fpm Elevator fixit guy Joined: Apr 2013 Posts: 41	Not sure we just got the account. It doesn't show any other signs of not being calibrated correctly.

Photo Gallery