Otis 411, what is GS_P

You are not logged in. [Log In] Home Forums Technical Questions Otis 411, what is GS_P

0 registered members (), 20 guests, and 2 spiders.

Key: Admin, Global Mod, Mod

Newest Members

Forum Statistics

Forums13

Topics6,509

Posts36,848

Members8,461

Most Online117
Jan 16th, 2020

Print Thread

#16664 - 04/05/16 12:41 AM Otis 411, what is GS_P
Joined: Feb 2015 Posts: 26 Detroit City improving the trade
Detroit City improving the trade Joined: Feb 2015 Posts: 26 Michigan	I seem to be having an intermittent problem with the GS_P input. I am not able to find it in the prints. it seems to be tied to door, gate locks, and DCL contracts. thanks

#16668 - 04/05/16 01:53 AM Re: Otis 411, what is GS_P [Re: Detroit City]
Joined: Jan 2012 Posts: 885 jkh 4 Ever Learning.
jkh 4 Ever Learning. Joined: Jan 2012 Posts: 885	Is this the same car you ask about BP? If it is, sure sounds like a bad MLB... Do you have a tool? Do you have a 2962 error code? Make good choices, JKH

#16670 - 04/05/16 04:07 AM Re: Otis 411, what is GS_P [Re: jkh]
Joined: Mar 2015 Posts: 69 Magic smoke Shaking the Bush!!
Magic smoke Shaking the Bush!! Joined: Mar 2015 Posts: 69 On a Boat!	That's the gate switch PAL input. It's one of the inputs that does the C-I/O check before each run. It's a buddy(Pal) input. It should show two inputs on the print. They go to different areas. Last edited by Magic smoke; 04/05/16 04:17 AM. When every circuit board is made. They put a little magic smoke inside.

#16707 - 04/08/16 11:00 AM Re: Otis 411, what is GS_P [Re: Magic smoke]
Joined: Feb 2015 Posts: 26 Detroit City improving the trade
Detroit City improving the trade Joined: Feb 2015 Posts: 26 Michigan	car is running, I believe the problem was DCL contacts not opening. the fault was 2812. I just got my hands on a tool for the next problem. thanks

Photo Gallery