Tac 50-04 813 fault

You are not logged in. [Log In] Home Forums Technical Questions Tac 50-04 813 fault

0 registered members (), 8 guests, and 2 spiders.

Key: Admin, Global Mod, Mod

Newest Members

Forum Statistics

Forums13

Topics6,525

Posts36,927

Members8,461

Most Online117
Jan 16th, 2020

Print Thread

#16809 - 04/19/16 08:59 PM Tac 50-04 813 fault
Joined: Nov 2012 Posts: 27 matt 24 newbie
matt 24 newbie Joined: Nov 2012 Posts: 27	Negative torque limit drive error. Anyone had this before? It was a few inches above top floor. Could not duplicate. Lots of possible causes for that fault.

#16812 - 04/20/16 12:33 AM Re: Tac 50-04 813 fault [Re: matt 24]
Joined: Mar 2015 Posts: 80 Whadafack journeyman
Whadafack journeyman Joined: Mar 2015 Posts: 80	Check the brake and make sure its lifting properly. Secure any loose connections in the circuit. Check your relays, especially bk1.

#16858 - 04/26/16 03:37 AM Re: Tac 50-04 813 fault [Re: Whadafack]
Joined: Dec 2012 Posts: 25 Street rodder newbie
Street rodder newbie Joined: Dec 2012 Posts: 25	Check or replace those Finder relays in the controller, they cause a lot of problems.

Photo Gallery

Page Time: 0.035s Queries: 15 (0.008s) Memory: 2.6661 MB (Peak: 2.8047 MB) Zlib disabled. Server Time: 2024-05-12 10:35:56 UTC