Who's Online Now
0 registered members (), 20 guests, and 0 spiders.
Key: Admin, Global Mod, Mod
March
S M T W T F S
1 2
3 4 5 6 7 8 9
10 11 12 13 14 15 16
17 18 19 20 21 22 23
24 25 26 27 28 29 30
31
Newest Members
Prairieelevator, Robot Rob, Montkone, Jevans, Clayshooter
8395 Registered Users
Forum Statistics
Forums13
Topics6,468
Posts36,656
Members8,395
Most Online117
Jan 16th, 2020
Previous Thread
Next Thread
Print Thread
#17361 - 06/23/16 12:35 PM Otis 211 w/ at400 door operator  
Joined: Apr 2016
Posts: 22
Getemup Offline
stranger
Getemup  Offline
stranger

Joined: Apr 2016
Posts: 22
Working on a Otis 211 with the at400 door operator and was wondering if you are able to turn down the nudging force and the closing force.

#17366 - 06/24/16 12:47 AM Re: Otis 211 w/ at400 door operator [Re: Getemup]  
Joined: Mar 2015
Posts: 69
Magic smoke Offline
Shaking the Bush!!
Magic smoke  Offline
Shaking the Bush!!

Joined: Mar 2015
Posts: 69
On a Boat!
all those parameters are set when you do a learn run. Why would you need to turn them down?


When every circuit board is made. They put a little magic smoke inside.
#17367 - 06/24/16 02:12 AM Re: Otis 211 w/ at400 door operator [Re: Magic smoke]  
Joined: Dec 2015
Posts: 1,529
Indirtwetrust Offline
ElevatorPractitioner
Indirtwetrust  Offline
ElevatorPractitioner

Joined: Dec 2015
Posts: 1,529
Local 18
(Closing force, N) and (Nudging force) are adjustable parameters through the tool.

#17397 - 06/29/16 06:30 PM Re: Otis 211 w/ at400 door operator [Re: Indirtwetrust]  
Joined: Apr 2016
Posts: 22
Getemup Offline
stranger
Getemup  Offline
stranger

Joined: Apr 2016
Posts: 22
Did the learn run, but still maxing out my door gauge. Can you hook up the tool up to the port on the operator or is it through the controller.

#17401 - 06/30/16 12:17 AM Re: Otis 211 w/ at400 door operator [Re: Getemup]  
Joined: Dec 2015
Posts: 1,529
Indirtwetrust Offline
ElevatorPractitioner
Indirtwetrust  Offline
ElevatorPractitioner

Joined: Dec 2015
Posts: 1,529
Local 18
Either should work.

#17405 - 06/30/16 02:41 AM Re: Otis 211 w/ at400 door operator [Re: Indirtwetrust]  
Joined: Mar 2015
Posts: 69
Magic smoke Offline
Shaking the Bush!!
Magic smoke  Offline
Shaking the Bush!!

Joined: Mar 2015
Posts: 69
On a Boat!
Thru the door operator. Don't believe you can change force item or profile from controller.

some of the at400 had to have a software upgrade to correct this problem. Door would torque up after a stall and exceed max allowed force. The black belt operator had the same problem.


When every circuit board is made. They put a little magic smoke inside.
#17409 - 06/30/16 05:38 PM Re: Otis 211 w/ at400 door operator [Re: Magic smoke]  
Joined: Apr 2016
Posts: 22
Getemup Offline
stranger
Getemup  Offline
stranger

Joined: Apr 2016
Posts: 22
Thanks guy's, changed out the at400 door operator with new and now not maxing out my gauge but still is pushing the code maximum, but stable at 30 on the closing and nudging force.

#18974 - 12/18/16 01:00 AM Re: Otis 211 w/ at400 door operator [Re: Getemup]  
Joined: Jul 2014
Posts: 14
Peter iuec Offline
Dumbguy=more$$$$
Peter iuec  Offline
Dumbguy=more$$$$

Joined: Jul 2014
Posts: 14
Canada
You can adjust nudging close force as low as 80 if you have a service tool. Another way is to make some other changes that make it reenergize in the open direction. If you would like PM me and I can help you.

#18980 - 12/18/16 04:53 AM Re: Otis 211 w/ at400 door operator [Re: Peter iuec]  
Joined: Dec 2010
Posts: 566
elmcannic Offline
addict
elmcannic  Offline
addict

Joined: Dec 2010
Posts: 566
S. Central Utah
My experience is that the torque is factory set at maximum, 30lbs. It's a pain to check too as the door edge fires a reopen every time you get your gauge near it.
My experiment was to slow high speed down to get less torque, but then door close time was affected and a nudge buzzer would turn on near full close which generated reduced speed and ROA call backs. Reverted to original parameters.
Maybe Green Pants will chime in to tell us what the answer may be.

#18984 - 12/20/16 01:28 AM Re: Otis 211 w/ at400 door operator [Re: elmcannic]  
Joined: May 2012
Posts: 194
Len Offline
member
Len  Offline
member

Joined: May 2012
Posts: 194
...goodluck with that..cannot be changed,,,


Photo Gallery
PECCO PH5000 Overspeed Governor
Drive sheave
The best helper.
Rotary Oildraulic
Old Otis badge.
Brakes,Coil,Rotor
KONE MX10 repair tool kit
Powered by UBB.threads™ PHP Forum Software 7.6.0
Page Time: 0.041s Queries: 15 (0.008s) Memory: 2.7166 MB (Peak: 2.9179 MB) Zlib disabled. Server Time: 2024-03-29 04:38:49 UTC