Otis 211 reopen problem

You are not logged in. [Log In] Home Forums Technical Questions Otis 211 reopen problem

0 registered members (), 10 guests, and 0 spiders.

Key: Admin, Global Mod, Mod

Newest Members

Forum Statistics

Forums13

Topics6,519

Posts36,895

Members8,461

Most Online117
Jan 16th, 2020

Print Thread

#17514 - 07/14/16 04:07 PM Otis 211 reopen problem
Joined: Jun 2015 Posts: 30 firbug13 newbie
firbug13 newbie Joined: Jun 2015 Posts: 30	I have an Otis car that is a 3 stop front and rear opening and when the door begins to close and you enter a car call it reopens the door only if the door is in travel. If you wait until the door is closed all of the way then hit your car call it runs fine.Tried to do hard reset did not work. I do not have a otis tool all we are a union independent company with no money any suggestions?

#17517 - 07/14/16 11:42 PM Re: Otis 211 reopen problem [Re: firbug13]
Joined: Dec 2015 Posts: 1,539 Indirtwetrust ElevatorPractitioner
Indirtwetrust ElevatorPractitioner Joined: Dec 2015 Posts: 1,539 Local 18	Does it do this at every floor? Either door or just one?

#17526 - 07/15/16 05:30 AM Re: Otis 211 reopen problem [Re: Indirtwetrust]
Joined: Mar 2015 Posts: 69 Magic smoke Shaking the Bush!!
Magic smoke Shaking the Bush!! Joined: Mar 2015 Posts: 69 On a Boat!	what type of door operators does it have? All your buttons go thru the TV1 board it maybe bad also. If you can get your hands on a tool you can look at all the inputs and see what's firing the D.O. When every circuit board is made. They put a little magic smoke inside.

#17635 - 07/27/16 10:18 PM Re: Otis 211 reopen problem [Re: Magic smoke]
Joined: Aug 2015 Posts: 20 Elevatortec stranger
Elevatortec stranger Joined: Aug 2015 Posts: 20	Sounds like a bad Lambada board. I had a similar problem.

Photo Gallery