Galaxy controller .... PI blinking

You are not logged in. [Log In] Home Forums Technical Questions Galaxy controller .... PI blinking

1 registered members (MX4), 20 guests, and 2 spiders.

Key: Admin, Global Mod, Mod

Newest Members

Forum Statistics

Forums13

Topics6,525

Posts36,929

Members8,461

Most Online117
Jan 16th, 2020

Print Thread

#19954 - 03/20/17 06:57 PM Galaxy controller .... PI blinking
Joined: Nov 2012 Posts: 7 maine_r Upsanddowns
maine_r Upsanddowns Joined: Nov 2012 Posts: 7 New England	I recently saw a Galaxy controller shut down. The pushbutton PI was blinking B and then 05 ..the car was at the basement level doors shut pushbutton did not open them... there was also a board in the controller blinking the same. I looked in the manual and saw nothing about this. Can someone explain this fault to me. Thank you

#19955 - 03/20/17 07:04 PM Re: Galaxy controller .... PI blinking [Re: maine_r]
Joined: Mar 2014 Posts: 144 JustWolf Liscensed Journeyman
JustWolf Liscensed Journeyman Joined: Mar 2014 Posts: 144 Milwaukee	OS Out of Service

#19962 - 03/22/17 01:54 AM Re: Galaxy controller .... PI blinking [Re: JustWolf]
Joined: Nov 2012 Posts: 7 maine_r Upsanddowns
maine_r Upsanddowns Joined: Nov 2012 Posts: 7 New England	Thank you much. Any idea which manual I can find that in? I would like to believe that I Did not read over that in any of the manuals that were on site... Always good to know Thanks I live in the north east. Where one day you can walk out of the job and it be 60 out and the next day its snowing. good times. Im new to the forum.Iinstall thyssen product and on my way into adjustong. Ive got 15 years in and im 34. UNION STRONG BABY !

#19965 - 03/22/17 12:55 PM Re: Galaxy controller .... PI blinking [Re: maine_r]
Joined: Mar 2014 Posts: 144 JustWolf Liscensed Journeyman
JustWolf Liscensed Journeyman Joined: Mar 2014 Posts: 144 Milwaukee	The PI will not flash any fault codes. They are in the controller.

Photo Gallery