330A - Elevator Forum

You are not logged in. [Log In] Home Forums Technical Questions 330A

0 registered members (), 11 guests, and 2 spiders.

Key: Admin, Global Mod, Mod

Newest Members

Forum Statistics

Forums13

Topics6,521

Posts36,911

Members8,461

Most Online117
Jan 16th, 2020

Print Thread

#21783 - 10/03/17 12:25 AM 330A
Joined: Dec 2011 Posts: 264 beaupeep Mechanic
beaupeep Mechanic Joined: Dec 2011 Posts: 264 ontario	What does LF mean on display. Have that flashing with FATL.

#21785 - 10/03/17 01:36 AM Re: 330A [Re: beaupeep]
Joined: Jan 2014 Posts: 736 Rolly old hand
Rolly old hand Joined: Jan 2014 Posts: 736	FATL means a Fatal Error to shut car down.

#21786 - 10/03/17 01:55 AM Re: 330A [Re: Rolly]
Joined: Dec 2011 Posts: 264 beaupeep Mechanic
beaupeep Mechanic Joined: Dec 2011 Posts: 264 ontario	I knew what fatl was, but not a clue about lf,no where in my book. Have you ever seen dol and dcl are high on crip board but could actually watch them change state with a meter in the cop board? Last edited by beaupeep; 10/03/17 01:56 AM.

#21789 - 10/03/17 03:24 PM Re: 330A [Re: beaupeep]
Joined: Nov 2009 Posts: 3 sparky13 stranger
sparky13 stranger Joined: Nov 2009 Posts: 3	did board take power surge. Usually happens if this occurs. Could be bad criphna board and also check gcio360 as well. Call Parts Specialists for these.

#21798 - 10/03/17 11:16 PM Re: 330A [Re: sparky13]
Joined: Dec 2011 Posts: 264 beaupeep Mechanic
beaupeep Mechanic Joined: Dec 2011 Posts: 264 ontario	Believe it did, think it took out drive in cop and cio board. Sent board out for repair and waiting on new drive from china. News for you all, rumour has it the drive that adams supplies is no longer being made, found out the hard way

#21930 - 10/17/17 11:38 PM Re: 330A [Re: beaupeep]
Joined: Dec 2011 Posts: 264 beaupeep Mechanic
beaupeep Mechanic Joined: Dec 2011 Posts: 264 ontario	Lift is running again. Had to replace gcio, ciao and door op drive. Thanks for the help

Photo Gallery