Otis GCS with shutd normal message

You are not logged in. [Log In] Home Forums Technical Questions Otis GCS with shutd normal message

0 registered members (), 20 guests, and 2 spiders.

Key: Admin, Global Mod, Mod

Newest Members

Forum Statistics

Forums13

Topics6,513

Posts36,869

Members8,461

Most Online117
Jan 16th, 2020

Print Thread

#22032 - 10/28/17 03:07 PM Otis GCS with shutd normal message
Joined: Dec 2014 Posts: 19 ridevertical stranger
ridevertical stranger Joined: Dec 2014 Posts: 19	Hi everyone, I have an old Dover that was modded by Otis with a GCS controller. Fault log reveals "shutd normal". Safety circuit, doors, fuses, starter are all seemingly good to run. The elevator will not move oon inspection or auto. TCI lock is disabled. I've tried pfram reset. No luck. I ran self test, and it says baseline eeprom test failed. Is there anything i can do about that besides calling in the big O?

#22106 - 11/03/17 10:09 AM Re: Otis GCS with shutd normal message [Re: ridevertical]
Joined: Jul 2014 Posts: 14 Peter iuec Dumbguy=more$$$$
Peter iuec Dumbguy=more$$$$ Joined: Jul 2014 Posts: 14 Canada	Try a m-2-4 blue enter its another PFram reset then M-2-2-3-1 of that don't work let me know.

Photo Gallery

Page Time: 0.065s Queries: 14 (0.030s) Memory: 2.6550 MB (Peak: 2.7874 MB) Zlib disabled. Server Time: 2024-05-02 03:26:00 UTC