It's on the bottom, and I don't think it's all contained on just one connector. There is a connector for the doors, another one for car and shaft stuff, etc. You really should look up the safety circuit on the print, and at least get familiar with that. The specific connector designation is shown with each wire pin#. When you find the safety circuit, you can look up the pin numbers and connector numbers at the same time. Stretch your mind! It's good for the soul!
Also, if the couinterweight is kissing the buffer, and the car is 12" above the top landing, then your final limits will be open.
Where are you from, buddy? Just curious...Sounds like English is a 2nd language for you, yes?
Last edited by Vic; 08/03/11 02:49 AM.