KONE monospace V3f25 no input to brake module

You are not logged in. [Log In] Home Forums Technical Questions KONE monospace V3f25 no input to brake module

0 registered members (), 24 guests, and 4 spiders.

Key: Admin, Global Mod, Mod

Newest Members

Forum Statistics

Forums13

Topics6,515

Posts36,882

Members8,461

Most Online117
Jan 16th, 2020

Print Thread

#22869 - 01/31/18 12:05 PM KONE monospace V3f25 no input to brake module
Joined: Aug 2013 Posts: 17 bowser stranger
bowser stranger Joined: Aug 2013 Posts: 17 Auckland. New Zealand	Brake doesn't lift on KONE monospace. The input to the brake module which Im guessing tells the module to lift the brake does not change when driving on inspection or normal and we get error 0101. This input comes from the LCECPU board via a ribbon cable. It is labelled 24v, 0v and control. It doesnt change state when we yry to run the lift. Has anyone experienced this?

#22889 - 01/31/18 10:07 PM Re: KONE monospace V3f25 no input to brake module [Re: bowser]
Joined: Apr 2017 Posts: 96 UpandDown2321 journeyman
UpandDown2321 journeyman Joined: Apr 2017 Posts: 96	Sounds like it could be contact failure for PWM enable. 201:3 and 201:4 have contacts for that.

#22898 - 02/01/18 03:53 AM Re: KONE monospace V3f25 no input to brake module [Re: bowser]
Joined: Apr 2014 Posts: 263 heisenberg Engineer
heisenberg Engineer Joined: Apr 2014 Posts: 263	Could be faulty brake module, I've had to replace 2 of them.

#22903 - 02/01/18 11:03 AM Re: KONE monospace V3f25 no input to brake module [Re: bowser]
Joined: Aug 2013 Posts: 17 bowser stranger
bowser stranger Joined: Aug 2013 Posts: 17 Auckland. New Zealand	We changed the brake module and its not that. The input to the brske module doesnt change.... the control is supposed to be grounded which enables the brake module to lift the brakes... but this input/output does not change.

#22905 - 02/01/18 05:55 PM Re: KONE monospace V3f25 no input to brake module [Re: bowser]
Joined: Nov 2013 Posts: 93 koneisland journeyman
koneisland journeyman Joined: Nov 2013 Posts: 93	Faulty CPU or ribbon cable ?

#22906 - 02/01/18 10:56 PM Re: KONE monospace V3f25 no input to brake module [Re: bowser]
Joined: Aug 2013 Posts: 17 bowser stranger
bowser stranger Joined: Aug 2013 Posts: 17 Auckland. New Zealand	Its what Im thinking... Have you had this before?

#22913 - 02/02/18 03:02 PM Re: KONE monospace V3f25 no input to brake module [Re: bowser]
Joined: Aug 2013 Posts: 17 bowser stranger
bowser stranger Joined: Aug 2013 Posts: 17 Auckland. New Zealand	Was the main drive board. FYI

#22962 - 02/06/18 05:41 AM Re: KONE monospace V3f25 no input to brake module [Re: bowser]
Joined: Apr 2014 Posts: 263 heisenberg Engineer
heisenberg Engineer Joined: Apr 2014 Posts: 263	Dam, hope it wasn't too pricey! Glad you found the problem

Photo Gallery