Resolve 100 DRIVE Issue

You are not logged in. [Log In] Home Forums Technical Questions Resolve 100 DRIVE Issue

0 registered members (), 20 guests, and 3 spiders.

Key: Admin, Global Mod, Mod

Newest Members

Forum Statistics

Forums13

Topics6,525

Posts36,929

Members8,461

Most Online117
Jan 16th, 2020

Print Thread

#23660 - 04/02/18 06:33 PM Resolve 100 DRIVE Issue
Joined: Apr 2016 Posts: 8 dayton71180 stranger
dayton71180 stranger Joined: Apr 2016 Posts: 8	All, I have a KONE Resolve 100 that is giving me a Start Current Fault. Has anyone ran into this issue. Had DRIVE checked out and it is good. Checked all incoming power as well as connections and Parameters. Any help would be appreciated!!

#23661 - 04/02/18 08:22 PM Re: Resolve 100 DRIVE Issue [Re: dayton71180]
Joined: Feb 2013 Posts: 761 john jay old hand
john jay old hand Joined: Feb 2013 Posts: 761 ohio	What fault code and sub code is being generated? Is this an AC or DC unit? What is the LDW %, in menu 5 #1.

#23667 - 04/03/18 04:58 PM Re: Resolve 100 DRIVE Issue [Re: dayton71180]
Joined: Apr 2016 Posts: 8 dayton71180 stranger
dayton71180 stranger Joined: Apr 2016 Posts: 8	AC Unit - LDW is good - 0130 Fault and 1023 sub code

#23699 - 04/06/18 12:50 AM Re: Resolve 100 DRIVE Issue [Re: dayton71180]
Joined: Sep 2014 Posts: 154 BRG member
BRG member Joined: Sep 2014 Posts: 154	I have had the YAS board cause this problem.

#23716 - 04/07/18 05:51 PM Re: Resolve 100 DRIVE Issue [Re: dayton71180]
Joined: Feb 2013 Posts: 761 john jay old hand
john jay old hand Joined: Feb 2013 Posts: 761 ohio	the fault code says that the fault was generated to the computer by the 3rd party Drive. It was reported to the MCUYAS board. So very vague as to what is happening.

#23722 - 04/08/18 12:23 AM Re: Resolve 100 DRIVE Issue [Re: dayton71180]
Joined: Feb 2013 Posts: 761 john jay old hand
john jay old hand Joined: Feb 2013 Posts: 761 ohio	One other note, the fault was generated because the computer detected a voltage at the motor when it should been at floor level and the run completed. So it may be happening at the end of the run and not the beginning. Not sure though, just something to look at.

Photo Gallery