|
1 registered members (ChurchGuy),
14
guests, and
0
spiders. |
Key:
Admin,
Global Mod,
Mod
|
|
|
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
27
|
28
|
29
|
30
|
|
|
|
|
|
Forums13
Topics6,504
Posts36,824
Members8,461
|
Most Online117 Jan 16th, 2020
|
|
|
#23861 - 04/26/18 06:44 PM
Re: Otis MCS 120 Hyd. with Bucher
[Re: Yus123]
|
Joined: Aug 2014
Posts: 134
Alex75
member
|
member
Joined: Aug 2014
Posts: 134
Sweden
|
Hi Yus123
Does the lift have a pawl device? If yes, try to disable the Anti Creep Device for testing purpose. Set parameter in LCB-II M1-3-1-4 (Drive parameters) ACD/UXT = 0 (Disabled).
/Alex
Last edited by Alex75; 04/26/18 06:48 PM.
|
|
|
#23884 - 04/30/18 06:50 AM
Re: Otis MCS 120 Hyd. with Bucher
[Re: Yus123]
|
Joined: Aug 2014
Posts: 134
Alex75
member
|
member
Joined: Aug 2014
Posts: 134
Sweden
|
Hi Yus123
It looks like the only things that can generate the DAR state is:
- Fault from the Bucher control (Is the relay on the Bucher Power Supply connected?, If yes try to bridge this relay). - Or one of these inputs have been active: OTS (Oil Temp Switch), PLS (Pressure Limit Switch), MPD (Motor Protection Device), THB (Thermo Contact).
/Alex
Last edited by Alex75; 04/30/18 07:00 AM.
|
|
|
|
|
|
|