Otis 211

You are not logged in. [Log In] Home Forums Technical Questions Otis 211

1 registered members (WarrioR), 15 guests, and 4 spiders.

Key: Admin, Global Mod, Mod

Newest Members

Forum Statistics

Forums13

Topics6,532

Posts36,953

Members8,461

Most Online117
Jan 16th, 2020

Print Thread

#24396 - 07/22/18 07:19 PM Otis 211
Joined: May 2013 Posts: 224 Jcjmowrey enthusiast
Jcjmowrey enthusiast Joined: May 2013 Posts: 224 Atlanta ga	Does anyone know what shutdown code “ICOR” means on a 211 If all else fails, read the instructions

#24400 - 07/23/18 12:40 AM Re: Otis 211 [Re: Jcjmowrey]
Joined: Dec 2009 Posts: 542 solidstate addict
solidstate addict Joined: Dec 2009 Posts: 542	Is it 1COR? COR is Correction run.

#24402 - 07/23/18 01:35 AM Re: Otis 211 [Re: Jcjmowrey]
Joined: May 2013 Posts: 224 Jcjmowrey enthusiast
Jcjmowrey enthusiast Joined: May 2013 Posts: 224 Atlanta ga	Maybe so. I haven’t been there yet but going first thing in the morning. Tech said it was down with doors open on 2nd floor. Won’t reset or run on inspection. Clro reset procedure was tried. That’s all I know so far. If all else fails, read the instructions

#24411 - 07/24/18 11:08 AM Re: Otis 211 [Re: Jcjmowrey]
Joined: May 2013 Posts: 224 Jcjmowrey enthusiast
Jcjmowrey enthusiast Joined: May 2013 Posts: 224 Atlanta ga	It was 1COR. Bad iobd board not let any outputs out. Major heat damage to lower right side. If all else fails, read the instructions

Photo Gallery

Page Time: 0.023s Queries: 15 (0.006s) Memory: 2.6755 MB (Peak: 2.8260 MB) Zlib disabled. Server Time: 2024-05-19 14:47:34 UTC