|
0 registered members (),
10
guests, and
0
spiders. |
Key:
Admin,
Global Mod,
Mod
|
|
|
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
27
|
28
|
29
|
30
|
|
|
|
|
|
Forums13
Topics6,497
Posts36,804
Members8,395
|
Most Online117 Jan 16th, 2020
|
|
|
#25091 - 10/29/18 08:50 AM
Schindler Varidor 10 upgrade with Fermator VVVF
|
Joined: Jun 2018
Posts: 13
Nikic
stranger
|
stranger
Joined: Jun 2018
Posts: 13
|
Hi guys, i need to upgrade varidor 10 car doors with Fermatoor vvvf car doors, SDIC is Q3. attaching the bords photo, on the link below https://ibb.co/fBS8bVAny help regarding wiring and collecting the signals for new car doors would be appreciated
|
|
|
#25112 - 10/31/18 08:45 AM
Re: Schindler Varidor 10 upgrade with Fermator VVVF
[Re: Nikic]
|
Joined: Aug 2014
Posts: 134
Alex75
member
|
member
Joined: Aug 2014
Posts: 134
Sweden
|
From the picture it looks like a Schindler Smart MRL? In that case you dont have a DOD PCB where you can choose your type of door machine. So I think I would remove the 3 main power phases of the X400 plug on the SDIC PCB and use the relays ST-S and ST-O to generate my open and close signals to the Fermator door controller. Remember to connect the door open limit (KET-O XKET Pin 2-5) and door close limit (KET-S XKET Pin 3-4) signals to the plug XKET on the SDIC PCB. The Schindler controller is very sensitive about these signals. You can connect the door reopen signal from the door controller in the same plug (KSKB XKET Pin 1-6).
Last edited by Alex75; 10/31/18 08:51 AM.
|
|
|
#25118 - 11/01/18 02:16 PM
Re: Schindler Varidor 10 upgrade with Fermator VVVF
[Re: Alex75]
|
Joined: Jun 2018
Posts: 13
Nikic
stranger
|
stranger
Joined: Jun 2018
Posts: 13
|
From the picture it looks like a Schindler Smart MRL? In that case you dont have a DOD PCB where you can choose your type of door machine. So I think I would remove the 3 main power phases of the X400 plug on the SDIC PCB and use the relays ST-S and ST-O to generate my open and close signals to the Fermator door controller. Remember to connect the door open limit (KET-O XKET Pin 2-5) and door close limit (KET-S XKET Pin 3-4) signals to the plug XKET on the SDIC PCB. The Schindler controller is very sensitive about these signals. You can connect the door reopen signal from the door controller in the same plug (KSKB XKET Pin 1-6). Yes Alex, it is Smart Mrl, and there is no DOD PCB. Thanks for helping me.
|
|
|
#25119 - 11/01/18 03:17 PM
Re: Schindler Varidor 10 upgrade with Fermator VVVF
[Re: Nikic]
|
Joined: Aug 2014
Posts: 134
Alex75
member
|
member
Joined: Aug 2014
Posts: 134
Sweden
|
From the picture it looks like a Schindler Smart MRL? In that case you dont have a DOD PCB where you can choose your type of door machine. So I think I would remove the 3 main power phases of the X400 plug on the SDIC PCB and use the relays ST-S and ST-O to generate my open and close signals to the Fermator door controller. Remember to connect the door open limit (KET-O XKET Pin 2-5) and door close limit (KET-S XKET Pin 3-4) signals to the plug XKET on the SDIC PCB. The Schindler controller is very sensitive about these signals. You can connect the door reopen signal from the door controller in the same plug (KSKB XKET Pin 1-6). Yes Alex, it is Smart Mrl, and there is no DOD PCB. Thanks for helping me. No worries, feel free to post again, if you have any futher questions. /Alex
|
|
|
#25174 - 11/12/18 08:00 AM
Re: Schindler Varidor 10 upgrade with Fermator VVVF
[Re: Nikic]
|
Joined: Jun 2018
Posts: 13
Nikic
stranger
|
stranger
Joined: Jun 2018
Posts: 13
|
Well guys, Varidor 10 cabin door upgrade with Fermator VVVF5 accomplished successfully Big thanks to Alex75 who helped with great explanation. Attaching some photos. https://ibb.co/fDDMvAhttps://ibb.co/iV9daAhttps://ibb.co/nHOt8VCheers !!!!!
Last edited by Nikic; 11/12/18 08:03 AM.
|
|
|
#25194 - 11/16/18 12:45 PM
Re: Schindler Varidor 10 upgrade with Fermator VVVF
[Re: koneisland]
|
Joined: Jun 2018
Posts: 13
Nikic
stranger
|
stranger
Joined: Jun 2018
Posts: 13
|
What a mess. Maintenance man needs shooting. You are right, not exactly for shooting but enough for being punished. Any way that photo is taken during figuring out how to do it, it is sorted later
|
|
|
|
|
|
|