CVT Millar not picking brake

You are not logged in. [Log In] Home Forums Technical Questions CVT Millar not picking brake

0 registered members (), 7 guests, and 1 spider.

Key: Admin, Global Mod, Mod

Newest Members

Forum Statistics

Forums13

Topics6,495

Posts36,789

Members8,395

Most Online117
Jan 16th, 2020

Print Thread

#25535 - 01/04/19 12:39 PM CVT Millar not picking brake
Joined: Jan 2018 Posts: 11 1970 stranger
1970 stranger Joined: Jan 2018 Posts: 11	First time I have seen one of these contraptions..29 is up looks like I am needing 24vdc to pick brake release? prints are in tuff shape, any help would be appreciated!

#25576 - 01/08/19 10:49 PM Re: CVT Millar not picking brake [Re: 1970]
Joined: Jan 2018 Posts: 11 1970 stranger
1970 stranger Joined: Jan 2018 Posts: 11	K7 is not energizing I have 24vdc on term 12 but not coming back to 11 which goes to relbk relay took the board off to get repaired?

#25600 - 01/10/19 12:02 AM Re: CVT Millar not picking brake [Re: 1970]
Joined: May 2012 Posts: 194 Len member
Len member Joined: May 2012 Posts: 194	......I found some of my old Millar CVT2400 stuff..looking at the prints that I have BKR is picked when PA contacts pick and when either a up/dn demand is given those contactors pick as well.fed from the (HMFM)..Hoist Motor Field Regulator..

#25615 - 01/11/19 12:20 AM Re: CVT Millar not picking brake [Re: 1970]
Joined: Jan 2018 Posts: 11 1970 stranger
1970 stranger Joined: Jan 2018 Posts: 11	I have a RELBK Len is that on your prints?

Photo Gallery

Page Time: 0.067s Queries: 15 (0.015s) Memory: 2.6681 MB (Peak: 2.8187 MB) Zlib disabled. Server Time: 2024-04-20 04:20:52 UTC