Who's Online Now
0 registered members (), 6 guests, and 2 spiders.
Key: Admin, Global Mod, Mod
March
S M T W T F S
1 2
3 4 5 6 7 8 9
10 11 12 13 14 15 16
17 18 19 20 21 22 23
24 25 26 27 28 29 30
31
Newest Members
Prairieelevator, Robot Rob, Montkone, Jevans, Clayshooter
8395 Registered Users
Forum Statistics
Forums13
Topics6,466
Posts36,640
Members8,395
Most Online117
Jan 16th, 2020
Previous Thread
Next Thread
Print Thread
#27984 - 10/09/19 04:50 PM TAC 50-04  
Joined: Mar 2014
Posts: 144
JustWolf Offline
Liscensed Journeyman
JustWolf  Offline
Liscensed Journeyman

Joined: Mar 2014
Posts: 144
Milwaukee
Bank of 3, 10 stop, 10K drive, which have been in service 6 years. One elevator is getting a 682 every other day. Did everything in the book,but the encoder itself. I have one available, yet not installed. I watched an adjuster do it once. He said the method he used did not need the ropes off, any one familiar with this method it was 6 years ago.

Thanks in advance.
Wolf.

#27988 - 10/09/19 09:53 PM Re: TAC 50-04 [Re: JustWolf]  
Joined: Dec 2015
Posts: 1,527
Indirtwetrust Offline
ElevatorPractitioner
Indirtwetrust  Offline
ElevatorPractitioner

Joined: Dec 2015
Posts: 1,527
Local 18
You only need to do an encoder alignment if it’s a permanent magnet motor, you can also just put a balanced load in it.
Noise is a major cause if encoder faults too. Make sure the shield is only landed on 1 end and cable isn’t running with high voltage. Motor cable and brake coil wiring should both have the shield landed on both ends to keep the noise in. Check all your motor connections too.

#27996 - 10/10/19 03:23 PM Re: TAC 50-04 [Re: JustWolf]  
Joined: Mar 2014
Posts: 144
JustWolf Offline
Liscensed Journeyman
JustWolf  Offline
Liscensed Journeyman

Joined: Mar 2014
Posts: 144
Milwaukee
Well Dirt, as luck would have it, it's a torin ER6 machine 2:1. Guess it is time to get weight here. Checked all the other stuff already. Luckily for me it"s a house route.

Thanks

#27998 - 10/10/19 07:54 PM Re: TAC 50-04 [Re: JustWolf]  
Joined: Dec 2015
Posts: 1,527
Indirtwetrust Offline
ElevatorPractitioner
Indirtwetrust  Offline
ElevatorPractitioner

Joined: Dec 2015
Posts: 1,527
Local 18
This would be an excellent time to tear down, clean & lube the brake pins since you will already have weight and the encoder off. You need a bolt to force off the encoder, do you have an ER6 manual?

#27999 - 10/11/19 12:29 PM Re: TAC 50-04 [Re: JustWolf]  
Joined: Mar 2014
Posts: 144
JustWolf Offline
Liscensed Journeyman
JustWolf  Offline
Liscensed Journeyman

Joined: Mar 2014
Posts: 144
Milwaukee
Yes, I do have the manual, and Ha-Ha, I have the bolt.
Thanks


Photo Gallery
PECCO PH5000 Overspeed Governor
Drive sheave
The best helper.
Rotary Oildraulic
Old Otis badge.
Brakes,Coil,Rotor
KONE MX10 repair tool kit
Powered by UBB.threads™ PHP Forum Software 7.6.0
Page Time: 0.026s Queries: 15 (0.008s) Memory: 2.6760 MB (Peak: 2.8359 MB) Zlib disabled. Server Time: 2024-03-28 10:07:14 UTC