|
0 registered members (),
15
guests, and
3
spiders. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
27
|
28
|
29
|
30
|
31
|
|
|
Forums13
Topics6,515
Posts36,881
Members8,461
|
Most Online117 Jan 16th, 2020
|
|
|
#28444 - 12/13/19 08:48 PM
Re: Tac 50
[Re: muggzy65]
|
Joined: Dec 2015
Posts: 1,538
Indirtwetrust
ElevatorPractitioner
|
ElevatorPractitioner
Joined: Dec 2015
Posts: 1,538
Local 18
|
You know I think one of those stupid switches on the door that open when you remove the cover cuts out common to DCL & DOL. Do you have a watchdog LED on the board? There are quite a few pick fuses on that board. Did you say if it runs from the manual buttons? And you’re saying you can’t talk to the door board directly with a FAST tool? Because the controller does not have any comm with the door. You are probably not going to get the same board for a replacement. There’s a whole upgrade kit with a new motor, a wiring change and an ABN board with UIT. There actually aren’t many of the old GE boards left. FCP command will tell you if your floor table is still there. I honestly don’t remember what the position count does while running the car on inspection though.
Last edited by Indirtwetrust; 12/13/19 08:56 PM.
|
|
|
|
|
|
|