Who's Online Now
1 registered members (Indirtwetrust), 12 guests, and 1 spider.
Key: Admin, Global Mod, Mod
March
S M T W T F S
1 2
3 4 5 6 7 8 9
10 11 12 13 14 15 16
17 18 19 20 21 22 23
24 25 26 27 28 29 30
31
Newest Members
Prairieelevator, Robot Rob, Montkone, Jevans, Clayshooter
8395 Registered Users
Forum Statistics
Forums13
Topics6,468
Posts36,654
Members8,395
Most Online117
Jan 16th, 2020
Previous Thread
Next Thread
Print Thread
#28471 - 12/20/19 12:30 PM Tac 50 door opera with LCD no fast  
Joined: Apr 2013
Posts: 38
muggzy65 Offline
newbie
muggzy65  Offline
newbie

Joined: Apr 2013
Posts: 38
southwest U.S.

Still,working on a 2008 tac 50. This car has a door operator that does not communicate with a Fast tool In IMS. Lost this universal door board in a power bump. This unit is programmed with a small LCD board with a key pad. I have a HD-03 door operator manual from IMS the programming is slightly different. Similar commands but not all are the same. Anyone have a write up in how to set up the universal door board with the small lcd key pad?

I’m also,getting a constant DOL error. The DOL and DCL are set up and working. There is an interface board that excepts the signals from the controller like DO and DC. That boards is called the 6300TX2. I’m thinking maybe one of the (Opto couplers, Swift terminology) may be triggered high? Is there any way to monitor
These with the IMS fast system

#28474 - 12/20/19 03:40 PM Re: Tac 50 door opera with LCD no fast [Re: muggzy65]  
Joined: Jan 2014
Posts: 736
Rolly Offline
old hand
Rolly  Offline
old hand

Joined: Jan 2014
Posts: 736
The universal door board does not communicate through IMS. Have to use the Universal door board App and orange cable. The IMS install disk 2.4.x.x comes with IMS'S, DMCI Fast, Door Fast. and UDC Fast. UDC fast is for the Universal Door Board. All but IMS use the orange cable. RS232 to 485. To use the orange cable the Serial port driver must be changed to ACPI.

#28476 - 12/21/19 02:13 AM Re: Tac 50 door opera with LCD no fast [Re: muggzy65]  
Joined: Dec 2015
Posts: 1,529
Indirtwetrust Online content
ElevatorPractitioner
Indirtwetrust  Online Content
ElevatorPractitioner

Joined: Dec 2015
Posts: 1,529
Local 18
What’s the part number of the door board? Something doesn’t sound right. Is this an actual Tac50 with card rack or is it a 50-03 or 50-04? The ABN boards with UIT that replaced the original Smartech don’t have any additional interface board. They are discrete already. It sounds like you’re talking about an HDLM operator that was used on Mod jobs with TAC50-04. Not that it couldn’t be used on a Tac50 but I’ve never seen it done an not sure why it would be.

#28484 - 12/24/19 12:45 PM Re: Tac 50 door opera with LCD no fast [Re: muggzy65]  
Joined: Feb 2017
Posts: 3
C not Offline
stranger
C not  Offline
stranger

Joined: Feb 2017
Posts: 3
On the lcd screen go to commands. Hit anl which is autonull to erase old scan. Then hit Ltr learn travel. I believe doors must be closed to learn travel. After you hit Ltr push mdo button on doorboard until doors reach the open limit. Go to save to flash to save your scan. Put door operator from test to auto and it should work

#28485 - 12/24/19 09:20 PM Re: Tac 50 door opera with LCD no fast [Re: muggzy65]  
Joined: Dec 2015
Posts: 1,529
Indirtwetrust Online content
ElevatorPractitioner
Indirtwetrust  Online Content
ElevatorPractitioner

Joined: Dec 2015
Posts: 1,529
Local 18
Autonull does not erase the scan. It tunes the analog to digital converters. The sequence is good practice but the reasoning is off. Doing a learn travel automatically erases the old scan.


Photo Gallery
PECCO PH5000 Overspeed Governor
Drive sheave
The best helper.
Rotary Oildraulic
Old Otis badge.
Brakes,Coil,Rotor
KONE MX10 repair tool kit
Powered by UBB.threads™ PHP Forum Software 7.6.0
Page Time: 0.035s Queries: 15 (0.013s) Memory: 2.6780 MB (Peak: 2.8375 MB) Zlib disabled. Server Time: 2024-03-29 00:51:07 UTC