Hi. So I have a 330a on my route that desires to stop working when the building fire alarm panel popped during a storm.
Originally just would not reset phase 1 after the panel was fixed.
Now it is “Block Ready UNV” 0=01 with the following error codes:

1207 : 2000 0006
1209 : 0007 0001

Did a double reset on inspection and drain the capacitor. 26v out of power supply. But now just dead dead. No programming tool just the LCD on the CRIPHNIA.

Any help would be appreciated, nursing medical care facility with, of course, one elevator.

3-stop if important.