TMS 50

You are not logged in. [Log In] Home Forums Technical Questions TMS 50

0 registered members (), 4 guests, and 0 spiders.

Key: Admin, Global Mod, Mod

Newest Members

Forum Statistics

Forums13

Topics6,498

Posts36,807

Members8,395

Most Online117
Jan 16th, 2020

Print Thread

#29852 - 09/02/20 05:36 AM TMS 50
Joined: Jun 2020 Posts: 21 crustyone Kiwi
crustyone Kiwi Joined: Jun 2020 Posts: 21 New Zealand	I keep getting two error codes 50 & 12. Mostly error 12 Anti Creep on a hydraulic lift three floors with a TMS50 controller. Can some one help me solve this one.

#29855 - 09/02/20 12:53 PM Re: TMS 50 [Re: crustyone]
Joined: Jan 2014 Posts: 736 Rolly old hand
Rolly old hand Joined: Jan 2014 Posts: 736	ANTICREEP FAULT FIRST TIME ERROR: 50 ANTICREEP IN FAULT ON 2 CONSECUTIVE DRIVES ERROR: 12

#29856 - 09/02/20 07:43 PM Re: TMS 50 [Re: crustyone]
Joined: Jun 2020 Posts: 21 crustyone Kiwi
crustyone Kiwi Joined: Jun 2020 Posts: 21 New Zealand	Thanks Rolly. Do you have any idea what would cause this fault. Do I need to do a learn run? If so how is this carried out.

#29857 - 09/02/20 07:45 PM Re: TMS 50 [Re: crustyone]
Joined: Jan 2014 Posts: 736 Rolly old hand
Rolly old hand Joined: Jan 2014 Posts: 736	Maybe Rope Gripper contact

#29859 - 09/02/20 07:49 PM Re: TMS 50 [Re: crustyone]
Joined: Jan 2014 Posts: 736 Rolly old hand
Rolly old hand Joined: Jan 2014 Posts: 736	If you don't have a rope gripper could be a dip switch setting. Or Possibly a brake poblem.. micros etd.. Last edited by Rolly; 09/02/20 08:03 PM.

#29861 - 09/03/20 05:07 AM Re: TMS 50 [Re: crustyone]
Joined: Jun 2020 Posts: 21 crustyone Kiwi
crustyone Kiwi Joined: Jun 2020 Posts: 21 New Zealand	Thanks Rolly. This unit is a hydraulic, so no brake. The Governor switch is all good. The dip switch is number 3, tried it in the other position but no change so returned it to its original position. I don't understand your reference to (micros etd) Any other suggestions would be greatly appreciated.

#29862 - 09/03/20 06:48 AM Re: TMS 50 [Re: crustyone]
Joined: Apr 2014 Posts: 263 heisenberg Engineer
heisenberg Engineer Joined: Apr 2014 Posts: 263	Maybe brake switches need checking?

#29863 - 09/03/20 12:19 PM Re: TMS 50 [Re: crustyone]
Joined: Jan 2014 Posts: 736 Rolly old hand
Rolly old hand Joined: Jan 2014 Posts: 736	Had a lot of bad boards.. Low end junk system. make sure you get the right board for your silk screen cover if you do get a new board,

#29872 - 09/04/20 05:20 PM Re: TMS 50 [Re: crustyone]
Joined: Jul 2020 Posts: 93 Jadam journeyman
Jadam journeyman Joined: Jul 2020 Posts: 93	Error 50 is Faults on the locking magnet have not caused two faults in succession in my book...

#29880 - 09/06/20 12:52 AM Re: TMS 50 [Re: crustyone]
Joined: Jun 2020 Posts: 21 crustyone Kiwi
crustyone Kiwi Joined: Jun 2020 Posts: 21 New Zealand	Thanks Jadam. What do you mean re the LOCKING MAGNET? can you expand your knowledge on this device. Thanks

#29897 - 09/09/20 05:16 PM Re: TMS 50 [Re: crustyone]
Joined: Jul 2020 Posts: 93 Jadam journeyman
Jadam journeyman Joined: Jul 2020 Posts: 93	Send me you mail address and i will send you the info

Photo Gallery