1 registered members (john jay),
14
guests, and
0
spiders. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
27
|
28
|
29
|
30
|
31
|
|
|
Forums13
Topics6,514
Posts36,876
Members8,461
|
Most Online117 Jan 16th, 2020
|
|
|
#30720 - 03/06/21 01:00 AM
Re: 3300 kse inconsistent fault
[Re: heisenberg]
|
Joined: May 2013
Posts: 224
Jcjmowrey
enthusiast
|
enthusiast
Joined: May 2013
Posts: 224
Atlanta ga
|
I had the same issue on a 3300 but at top floor, kse-u. I replaced cancna board to fix problem. I could look on the interface tool on the canmb and see the input locked up even though signals were changing state on my meter.
If all else fails, read the instructions
|
|
|
#30721 - 03/06/21 01:53 AM
Re: 3300 kse inconsistent fault
[Re: Jcjmowrey]
|
Joined: Apr 2014
Posts: 263
heisenberg
Engineer
|
Engineer
Joined: Apr 2014
Posts: 263
|
I had the same issue on a 3300 but at top floor, kse-u. I replaced cancna board to fix problem. I could look on the interface tool on the canmb and see the input locked up even though signals were changing state on my meter. I can't seem to find what the cancna board is? do you have any further info?
Last edited by heisenberg; 03/06/21 02:00 AM.
|
|
|
#30723 - 03/07/21 03:07 AM
Re: 3300 kse inconsistent fault
[Re: heisenberg]
|
Joined: May 2013
Posts: 224
Jcjmowrey
enthusiast
|
enthusiast
Joined: May 2013
Posts: 224
Atlanta ga
|
I could be wrong about the name, but I know it was the board on the cartop that the sensors, among other devices, plugged into. On this unit it was at the front next to door operator.
If all else fails, read the instructions
|
|
|
|
|